9
System Connections
HDMI connection setting
(only for Player with this connector)
Connect the HDMI output jack on the DVD Player to the Display device’s HDMI input jack with a HDMI cable.
Press the HDMI button on the remote control to shift to HDMI signal output mode, switch display device to
corresponding HDMI mode.
VGA connection setting
(only for Player with this connector)
Connect the player to the display device with VGA cable if you want VGA output mode.
if the DVD Player’s video output is under interlaced output mode, Select ‘VGA’ in the ‘COMPONENT’ menu,
press the PLAY button, and restart the player, then the video out is shifted to VGA output automatically.
If the DVD Player’s video output is under Y/Pb/Pr output mode, Select ‘VGA’ in the ‘COMPONENT’ menu, then
press the PLAY button to shift to VGA output.
Audio output connector
There are 2CH “L/R” analog audio output, 5.1CH output, optical output, coaxial digital audio output for Audio
connection use.
Connecting To A Common Amplifier
Connect the player’s 2CH L/R output to the common amplifier’s L/R input connector with Audio cable, as
shown in below figure. And set the player’s Audio output mode under “DOWNMIX” to “LT/RT” at the SPEAKER
SETUP menu.