32
EN
1.1 - SAFETY RULES
Operations executed inside the device
must be done with caution so to avoid
rough contact with sharp parts.
Personal injury caused by cuts, stings and
scraping.
Never leave the device open more than
the minimum time required for installa-
tion.
Possible personal injury to not authorized
personnel or animals.
Possible damage to the device caused by
bad weather.
Remember to cut the power supply be
-
fore attempting any operation to the in-
ner product.
Electrocution by contact with live conduc-
tors.
WARNING:
Do not put any flammable object in the
proximity of the product. Make sure that
the installation of every system component
is complying to current legislation.
Do not put any liquid or object containers
on the product.
The product is not designed to be used by
people with physical, sensorial or mental
disabilities, or, to people that lacks knowle-
dge or experience unless they have bene-
fited, through the intermediary of a person
responsible for their safety, from supervi-
sion or instructions regarding the use of
the product.
Children must be supervised to make sure
they will not play with the product or with
packing materials (metallic ends, plastic
bags, cardboards, etc).
The opening of the product and all the
maintenance operation must NOT be
executed by non qualified personnel.
WARNING:
This accessory kit is designed to be bu-
ild exclusively with SHERPA AQUADUE
S2 e SMALL system 04 – 06 – 08 – 10
sizing.
As established by the IEC60335-2-40,
Annex GG regulation, the maximum
charge of refrigerant in the system must
be lower than 1,84 kilograms.
Consecutively, the maximum length of
the piping connecting the inner to the
outer unit must be:
04 – 06 sizing 29 meters max
08 – 10 sizing 20 meters max
For more details about the installation,
additional charge and discharge of the
SHERPA AQUADUE S2 E SMALL sy-
stem, refer to the inner and outer unit
installation manual
1.2 - WASTE DISPOSAL
Domestic waste disposal is prohibited!
Inside the European Union, you may
find this symbol in the packaging
or accompanying documents of the
product. This means that electric and
electronic products must not be pla-
ced together with domestic waste.
For an adequate processing, recycling and dispo-
sal of the used products, it is mandatory to keep
these points in mind:
-These products must be returned only to certified
collection points.
-It is necessary to follow the current local area
laws.
It is possible to learn about correct disposal at
local municipalities, at the nearest waste disposal
service or from the manufacturer from which the
component was bought.
