PELER 20
ENGLISH
EN - 11
3c - COOLING/HUMIDIFIER KEY (A1)
When the appliance is running, press this key to start or stop the cooling/humidifier
function.
Press it once to start the function; the pump and the cooling/humidifier LED switch
on.
Press it a second time to stop the function.
This function cannot be activated If the pump is raised.
3d - OSCILLATION KEY (B1)
When the appliance is running and the pump is completely lowered, press this key
to start or stop the air directing function through the vertical flaps (12) (right and left).
Press it once to start the function; the oscillation LED switches on.
Press it a second time to stop the function.
3e - TIMER KEY (B7)
When the appliance is switched on, the timer and its LED are switched off by default.
Press this key and the timer changes according to this sequence:
1H ---> 2H ---> 4H ---> 8H ---> Off ---> 1H --->
...
Time is not cumulative and the LED changes depending on the selected time.
3f - MODE KEY (A7)
When the appliance is switched on, normal mode is set by default.
Press this key and the mode changes according to this sequence:
Normal ---> Natural ---> Sleep ---> Normal ---> Natural --->
...
The mode LED changes accordingly (the “natural” (A5) and “sleep” (A6) modes
are not available at “silent” speed (C3)).
The various modes work as follows:
1 -
Normal
(A4): the appliance works constantly at the set speed.
2 -
Natural
(A5): the appliance works changing air speed continuously.
The chart in the next page shows air variations depending on
the selected speed.
The LED only shows the air initial speed; other changes are
not reported.
Summary of Contents for PELER 20
Page 2: ......
