PELER 20
ENGLISH
EN - 13
3g - ENVIRONMENT PROTECTION FUNCTION
If the appliance is running and no key is pressed for 60 seconds, all the switched
on LEDs reduce their intensity.
When a key is pressed, active LEDs switch on at the maximum luminosity.
3h - WATER SHORTAGE FUNCTION
When the cooling function is active (LED “A2” switched on) the pump works for 50
seconds and if the appliance detects water shortage for 5 consecutive seconds,
it stops working.
The acoustic signal rings for 10 seconds.
3i - AUTOMATIC SHUT-OFF FUNCTION
The water pump automatically turns off when the lever (3) is raised in
position.
The humidifier function is not available in this condition.
3l - DRYING FUNCTION
If the air filter
(17) on the rear grille must be dried after using the cooling and hu-
midifier functions or before storing the appliance, press the “Speed” key (C7) on
the control panel and keep it pressed for 3 seconds to activate the drying function.
Air speed switches from the current one to “high” for 20 minutes.
The “high” speed LED flashes and it turns off when the function is over.
When the drying function is running, all the function keys except for
ON
/
OFF
are
disabled.
If the
ON
/
OFF
key is pressed before 20 minutes pass, the drying function remain-
ing time is not saved.
3m - MEMORIZATION FUNCTION IN CASE OF VOLTAGE LOSS
A.
When the appliance is switched on, the unit emits 10 “beeps” when power is
restored after a voltage drop or loss.
The control panel is switched off and it is not possible to run any function.
When voltage is restored, the appliance waits 30 seconds and then resumes
the function set before the blackout.
The appliance remains switched off if the blackout occurred while it was al-
ready switched off
.
Summary of Contents for PELER 20
Page 2: ......
