47
MAESTRO PRO INVERTER
Remove the pump - sensors -
slinger
(ref. “9.15 Removing the
pump - sensors -
slinger
on page 45). Disconnect the
condensate drain pipe
(2).
2
2
2
Remove the screws (3) and keep the whole evaporator unit (4)
slightly raised.
Push the
outdoor coil
(5) slightly forward and hold it in place.
NOTE: Be careful not to force too much and damage the pipes.
4
3
5
Rotate the condensate
slinger
(6) and remove it.
NOTE:
B
e careful not to break the attachment point (A).
6
A
NOTE:
To
clean the
slinger
, it is recommended to
fill it with water, shake it and empty it. Repeat the operation
several times in order to remove as much
Indoor
dirt as
possible that would obstruct the condensate drain holes
.
