Olimpia splendid ELLISSE HP, Manual

Page: 9 / 15

12 TIMER MODE
This mode enables a delayed switch ON or switch OFF operation to the overall unit.
The time delay can be set, enabled and canceled from both the remote control and
the display unit as follows:
12.1 Timer ON setting from remote control:
•
Switch ON the unit and select by B2,B3,B4,B5,B6 or B7 the working mode, set temperature
and fan speed the unit will apply when it will switch ON;
•
Switch the unit to standby mode by pressing B1;
•
By pressing B8, set the desired time delay (from 1 to 12 hours) after which the unit will
switch ON (starting from timer confirmation). At first B8 key operation, the remote control
display shows the previous selected delay time value or the preset one (6h) if no other timer
confirmations have occurred before. Each following B8 key operation increases the delay
time value by 1 hour. If no key operations occur for more than 5 seconds the timer setting
function ends.
•
Confirm the desired delay time by pressing B10. The remote controller display shows the
delay countdown to the switch ON operation. On the local user interface, L2 is switched
OFF, S4 is switched ON and S2=’h’. D1 - D2 show the delay countdown to the switch ON
operation (blinking for first 5 seconds, then fixed), symbols S6 to S13 (blinking) show for 5
seconds the setting the unit will apply when it will switch ON;
•
In order to cancel the delayed switch ON action, press the B10 button. The unit will switch to
standby mode (L1 OFF and L2 ON).
•
When the delay time set has elapsed, the unit switches ON with latest selected settings. All
the timer symbols on both the remote controller and the local interface disappear.
12.2 Timer OFF setting from remote control:
o
With the unit in any working mode (except standby), press B9 to set the desired time delay
(from 1 to 12 hours) after which the unit will switch OFF (starting from timer confirmation).
At first B9 key operation, the remote control display shows the previous selected delay time
value or the preset one (6h) if no other timer confirmations have occurred before. Each
following B9 key operation increases the delay time value by 1 hour. If no key operations
occur for more than 5 seconds the timer setting function ends.
o
Confirm the desired delay time by pressing B10. The remote controller display shows the
delay countdown to the switch OFF operation other than the current unit settings. On the
local user interface, S4 and S5 are switched ON and D1 - D2 show for 5 seconds the time
delay set, then switch back to previously displayed Tset value (only in cooling mode,
otherwise ‘ ‘ ). By pressing SW6, S2=’h’, D1 and D2 shows for 5 seconds in
blinking mode the remaining delay countdown to the switch OFF operation, and then restores
the previous visualization (see § 7.10.4);
o
In order to cancel the delayed switch OFF action, press the B10 button. On the local interface
S4 and S5 will be switched OFF. It’s possible to cancel the timer also by pressing the SW6
button during the remaining delay countdown visualization (see § 7.10.4);
o
When the delay time set has elapsed, the overall unit switches OFF (standby mode, L1 OFF,
L2 ON).