Olimpia splendid DOLCECLIMA ARIA 8, Instructions For Use And Maintenance Manual

Page: 59 / 220

DOLCECLIMA ARIA 8
ENGLISH
EN - 23
b.
The temperature set-point (Set temperature) can be adjusted from
16
°C to 3
1
°C with 1°C variations
thanks to B4/B5 or SW3/SW4 and the respective value appears on the display.
c.
Three minutes (maximum) after the activation of this operating mode the compressor starts and the
ap-pliance starts to distribute cold air.
3.6 - VENTILATION MODE (FAN)
a
. When this operating mode is used the appliance has no effect on the temperature or humidity of the
environment, it merely circulates the air.
b
. This mode can be selected by pressing B7 or SW2 until when the ventilation LED
(S5) is activated on the control panel display.
c
. In this operating mode, the internal fan is always on and it is possible to select the desired speed through
the keys B6 or SW6; the respective LEDs “High” (S1) or “Low” (S2) light up.
3.7 - DEHUMIDIFICATION MODE (DRY)
a
. This mode can be selected by pressing B7 or SW2 until when the dehumidification LED
(S4) is activated on the control panel display.
b . In DRY mode, it is not possible to select the fan speed or to adjust temperature.
The fan motor works at low speed.
c . Keep doors and windows closed to achieve the best dehumidifying effect.
Do not place the air outlet pipe out of a window.
d . Connect the condensation discharge pipe (paragraph 2.5.a)
3.8 - SLEEP MODE
a
. This mode can be selected by pressing B3 or SW7 until when the LED (S7) switches on.
b
. In this mode, the appliance enters energy conservation mode and works silently, autonomously decreasing
the fan speed.
3.9 - TIMER MODE
This mode can be used to activate a switching on/off timer of the appliance.
To activate the appliance SWITCHING ON timer, work as follows:
a
. With the appliance in stand-by mode (with the power plug connected), press the keys B2 or SW5.
b
. When the LED S6 flashes, set the desired time value through the keys B4/B5 or SW3/SW4
(0h (Timer off) ---> 1h ---> 2h ---> .. 24h ---> 23h ---> 22h ---> .. 0h (Timer off) ---> ..).
c
. The LED S6 remains steady on.
d
. The appliance will switch on automatically when it reaches the previously set time.
To activate the appliance SWITCHING OFF timer, work as follows:
a
. With the appliance switched on (LED S8 active), press the keys B2 or SW5.
b
. When the LED S6 flashes, set the desired time value through the keys B4/B5 or SW3/SW4
(0h (Timer off) ---> 1h ---> 2h ---> .. 24h ---> 23h ---> 22h ---> .. 0h (Timer off) ---> ..).
c
. The LED S6 remains steady on.
d
. The appliance will switch off automatically when it reaches the previously set time.
3.10 - NO FROST FUNCTION
In “Cooling”, “Dehumidification” or “Sleep” mode, if the drainage tube temperature is too low, the machine
automatically enters protection status; when temperature raises, the appliance returns to normal operation.