Olimpia splendid B0872, Instructions For Mounting And Use

Page: 44 / 188

ENGLISH
EN - 12
h.
Press key
“ ”
or
“ ”
(T2) to scroll the possible values of the parameters
i.
Press key
“ ”
(T3) to confirm the value
j.
Press key
“ ”
(T3) to exit the configuration or wait 20 seconds.
Quit and give power voltage to the system to start the unit under the new config -
uration.
ID Name Description Permitted values
CF
Configuration Configure the type of control
AU : Autonomous
rE : Remote
bU
Bus Protocol Allows to configure the type of bus used
AS : ASCII
rt : RTU
Ad
Unit Address
Allows to set/change the unit address
(insert the value in hexadecimal format) 00 -> FF (255)
Fa Fancoil Type
Allows to select the type of
fancoil
_0: Without flap (200-1000)
_1: All versions (1400-1600)
_2: With flap (200-1000)
Po
Position of installation Allows to select where the fancoil has
been installed
uP : roof installation
dO : floor installation
co
Temperature
compensation
Allows to choose the compensation
value to use
-5 : 5
bU – BUS Protocol:
Modicon Modbus” ASCII type Modicon Modbus RTU type
Baudrate = 9600 Baudrate = 9600
data bits = 7 data bits = 8
stop bit = 1 stop bit = 1
equality = yes equality = no
Ad - Unit Address:
In the event of need, it is possible to change the unit address.
The value must be entered in hexadecimal format.
The table below indicates the conversion of the first 80 numbers from decimal to hexadecimal format, for
the next numbers, please refer to the specific tables which can be consulted on the web.
Decimal Hexadecimal
1 01
2 02
3 03
4 04
5 05
6 06
Decimal Hexadecimal
7 07
8
08
9 09
10 0A
11 0B
12 0C