1.3. Electrostatic Warning
The ARM-JTAG-EW device is shipped in protective anti-static packaging.
The device must not be subject to high electrostatic potentials. General
practice for working with static sensitive devices should be applied when
working with this device.
1.4. ARM-JTAG-EW Usage Requirements
Cables:
1.8 meter USB A-B cable.
Software:
EW-ARM 5.30 from IAR Systems AB
2. Hardware
2.1. USB Connector
ARM-JTAG-EW has a standard USB device connector that requires a
standard USB A-B cable for connecting to a PC.
2.2. JTAG Connector
The JTAG connector pin description is given below.
Pin
№
Signal Direc
tion
Description
1
U
TG
I
Target reference voltage. Target board must connect
3 Pin direction is from the side of ARM-JTAG-EW. I stands for Input (Target to ARM-JTAG-EW), and
O for output (ARM-JTAG-EW to Target).
