4.2 Remote control function debugging and management
One remote control can control a lot of operators, and one operator can be controlled
by 15 remote controls utmost, but the operator only accept authorized remote control,
you do not worry that your neighbor’s remote control can open your door. You need to
manage the remote control when adding or canceling them:
Matching the code: authorize the remote control
Press And Release The code-matching white button S1 on power supply (see above
pictures), the LED D1 on the circuit panel will light shortly, then press and release
any key-press on the remote control (do not keep pressing), the LED D1 on the circuit
panel will light shortly again, and then the code matching is finished; if the LED
doesn’t light, you shall restart the above operation; If you need to add more remote
control, Just Repeat the above procedure.
Clear all the code authorization of remote control
Keep pressing the code -matching button for about 10 seconds until the LED
extinguish, all the authorized code will be cleared.
Inductor and other equipment debugging
Please refer to the instruction of inductor and other equipment.
