Olide SD3108 Product Manual Download Page 2

Safety Warning! 

Please read carefully the instructions before installing the door operator, we 

do  not  take  responsibility  for  the  loss  or  damage  due  to  the  improper  use 

disobeying the following cautions. 

△ 

 

 

 

Do use the power conforming to the regulations!

 Or otherwise, it may result in 

the damage of electronic component of partial circuit of machine.   

△ 

 

 

 

Maintain  the  reliable  grounding!

  The  enclosure  of  automatic  door  operator 

shall  be  made  of  metal  material  which  is  the  sound  electrical  conductor.  The 
grounding  of  automatic  door  operator  must  be  well  done,  especially  the  metal 
door body on operator, as the conductor, must be reliably grounded.   

△ 

 

 

 

Prevent  vapor  from  intrusion! 

The automatic door operator is inbuilt with the 

complicated  and  precise  electronic  components  to  prevent  from  vapor.  The 
machine enclosure is unsealed for maintaining the automatic door operator.   

△ 

 

 

 

Prohibit rapidly opening and closing automatic door by hand or rudely!

 No 

matter  on  operation  or  power  failure,  prohibit  rapidly  opening  and  closing 
automatic  door  by  hand  or  rudely  to  avoid  the  mechanical  damage  due  to 
overload of automatic door! 

△ 

 

 

 

The safety beam detector is highly recommended to avoid the probability of 

collision with pedestrian!

 If you haven’t the safety beam detector installed, You 

might  be  touched  in  the  door  operation  area.  So  please  use  the  safety  beam 
detector  where  there  are  elder  and  children,  and  please  also  lower  the 
opening/closing speed with the longer hold-opening times. 
 

△ 

 

 

 

The  safety  beam  detector  is  highly  recommended  to  avoid  the  probability  for 

hands  to  be  nipped  by  the  closing  door.  Do  not  worry  if  you  haven’t  the  safety 
beam  detector  installed,  because  the  door  operator  gives  the  buffer  action  and 
moves very slowly when the door closes to the 7-12°angle, please also adjust the 
inching latching force to a small range for the 100% safety for your children. 

△ 

 

 

 

The  person  unauthorized  by  the  company  shall  not  repair  or  modify  the 

spare  part!  If  any  problem  of  automatic  door  operator  is  found,  the 
automatic  door  operator  shall  not  be  directly  repaired  without  permission! 
Any  modification  to  the  automatic  door  operator  may  result  in  the  serious 
consequences!

 

 

Summary of Contents for SD3108

























Reviews: