Oleo-Mac orion 700, Operators Instruction Book

Page: 33 / 42

English
71
14 Maintenance
Warning!
Injuries due to the cutting blades!
„
Always switch off the robot lawnmower
at the [ON/OFF key] before star ting
maintenance and repair work.
„
Always wear work ing gloves when
carr ying out maintenance and care
jobs on the blade system.
„
Disconnect the transformer of the base
station from the mains.
Important!
Damage to the electrical/electronic system
by incorrect cleaning!
„
Do not clean the robot lawnmower with
a high-pressure cleaner or under running
water. Water penetration can cause
irreparable damage to the switch, battery
and circuit boards.
„
Entrust all repairs (apart from replacement of the blades) to
specialist workshops approved by the manufacturer.
The user is under obligation:
1. To bring the robot mower to the workshop after
between 100 and 200 hours operation, for:
• Check on tightness of bolts
• General check on programming and detection of
possible errors
2. To bring the robot mower to the workshop after 500
and 2500 hours operation, for:
• General check on tightness of bolts and mechanical
parts
• Check on error statistics
• Check on battery status
• Check on wheel bearings
• Inspection of blade and check for possible damage
• General inspection and cleaning
Operations to be carried out periodically by the user
• Once a week, clean the robot lawnmower thoroughly
with a hand brush or a cloth, and use care spray if
necessary. Contamination can impair the function of
the machine if not removed.
• Once a week, check the cutting blades for damage.
14.1 Check the rollers can move freely
1
1 Once a week, thoroughly clean the area around the rollers
(1) with a hand brush or cloth.
2 Check the rollers (1) can move and steer freely. If the rollers
(1) do not move freely, they must be freed up or renewed.
14.2 Checking/cleaning contacts
1
„
Check the contact surfaces (1) on the robot lawnmower for
contamination.
„
Clean the contact surfaces (1) on the robot lawnmower
with a cloth if necessary.
„
Charring on the contact surfaces indicates a poor charging
contact.
„
Bend the springs on the base station outwards.