52
Travel direction anti-tipping sensor
0 - 35 cm
100 cm
> 35 %
The robot lawnmower is switched off by the tilt sensor if
it encounters an upward or downward slope of more than
35%.
Sideways anti-tipping sensor
>35 %
The robot lawnmower is switched off by the tilt sensor if it
encounters sideways slopes of more than 35%.
4.5
Base station
1
2
3
4
The base station (2) is connected to the electrical power
supply (transformer) using the low-voltage cable (1).
The base station (2) generates a control signal and sends
this in the boundary cable (3).
There are two charging contacts (2) on the base station
(4) which contact the charging contacts on the robot
lawnmower as soon as it moves into the base station (2).
4.6
Transformer
Important
Damage due to splash water
Set up the transformer in a dry place where it is
protected against splash water.
4.7
Boundary cable
Important
Damage to the boundary cable
Do not scarify the lawn in the area on either side
of where the boundary cable is laid.
The boundary cable is secured with lawn pegs. If the
supplied boundary cable is not large enough for your lawn,
you can obtain an extension cable from your dealer.
