Oleo-Mac GS 520 Owner'S Manual Download Page 32

32

Italiano

English

Français

UTILIZZO

USE

UTILISATION

USI VIETATI

 

ATTENZIONE - Seguire sempre le norme di sicurezza. 

Questa motosega è progettata e costruita per 

l’abbattimento, la sezionatura e la sramatura di 

alberi o arbusti e per il taglio di oggetti di legno. È 

proibito tagliare altri tipi di materiali. Le vibrazioni 

ed il contraccolpo sono differenti ed i requisiti di 

sicurezza non sarebbero rispettati. Non utilizzare 

la motosega come leva per sollevare, spostare o 

spezzare oggetti, ne bloccarla su sostegni fissi. È 

proibito applicare alla presa di forza della motosega 

utensili o applicazioni che non siano quelli indicati 

dal costruttore.

 

ATTENZIONE - Tagliare solo legno o materiali a 

base di legno. Non tagliare il metallo, la plastica, la 

muratura o materiali da costruzione non di legno.

PRECAUZIONI PER L’AREA DI LAVORO 

 - Non lavorare vicino a fili elettrici.

 - Lavorare solo quando la visibilità e la luce sono sufficienti 

per vedere chiaramente.

 - Arrestare il motore prima di appoggiare la motosega.

 - Prestare particolare attenzione e allarme, quando 

si indossano le protezione uditive, in quanto tali 

apparecchiature possono limitare la capacità di ascoltare i 

suoni indicanti i rischi (inviti, segnali, avvertimenti, ecc.)

 - Siate estremamente cauti quando si lavora su pendii o 

terreni sconnessi.

 - Non tagliare al di sopra dell’altezza delle spalle; con 

una presa alta della motosega, è difficile controllare e 

contrastare le forze tangenziali (kickback).

 Non tagliare da una scala, questo è estremamente 

pericoloso.

 - Arrestare la motosega se la catena colpisce un oggetto 

estraneo. Ispezionare la motosega e fare riparare le parti 

danneggiate, se necessario.

 - Tenere la catena pulita da sporcizia e sabbia. Anche una 

piccola quantità di sporcizia rende rapidamente poco 

tagliente la catena e aumentare la possibilità di kickback.

 - Mantenere sempre asciutte e pulite le impugnature.

 - Tagliando un tronco o un ramo in tensione, fare attenzione 

a non farsi cogliere di sorpresa dall’istantaneo allentamento 

della tensione del legno.

 -  Usare estrema precauzione tagliando rami piccoli o arbusti 

che possono bloccare la catena, o essere proiettati contro 

di voi e farvi perdere l’equilibrio.

PROHIBITED USE

 

WARNING - Always follow the safety regulations. 

This chain saw is designed and built for felling, 

bucking and limbing trees or shrubs and for cutting 

wooden objects. It is forbidden to cut other types 

of material. Vibrations and  kickback vary with 

different materials and the requirements of the 

safety regulations would not be respected. Do not 

use the chainsaw as a lever for lifting, moving or 

splitting objects. Do not lock it over fixed stands. It 

is forbidden to hitch tools or applications to the P.t.o. 

that are not specified by the manufacturer.

 

WARNING - Cut only wood or materials made from 

wood. Do not cut metal, plastics, masonry or non-

wood building materials.

PRECAUTIONS FOR THE WORK AREA 

 - Do not work near electrical cables.

 - Work only in conditions offering sufficient visibility and 

light to see clearly.

 - Stop the engine before setting the chainsaw down.

 - Be particularly cautious and alert when wearing ear 

protectors, as these can restrict your ability to hear sounds 

indicating danger (shouts, signals, warnings, etc.)

 - Be extremely careful when working on slopes or uneven 

surfaces.

 - Do not cut above chest height, as a saw held higher is 

difficult to control against kickback forces.

 Do not cut from a ladder, this is extremely dangerous.

 - Stop the saw if the chain strikes a foreign object. Inspect 

the saw and repair parts as necessary.

 - Keep the chain out of dirt and sand. Even a small amount 

of dirt will quickly dull a chain and increase the possibility 

of kickback.

 - Always keep the handles dry and clean.

 - When cutting a limb that is under tension, be alert for 

springback so you will not be struck when the tension in 

the wood fibre is released.

 - Take great care when cutting small branches or shrubs 

which can block the chain, be thrown back towards you or 

cause you to lose your balance.

USAGES INTERDITS

 

ATTENTION - Suivre les règles de sécurité. Cette 

tronçonneuse est conçue et fabriquée pour abattre, 

tailler et élaguer des arbres ou des arbustes et 

pour découper des objets en bois. Il est interdit 

de couper d'autres matériaux. Les vibrations et le 

rebond sont en effet différents et les mesures de 

sécurité ne seraient pas respectées. N'utilisez pas la 

tronçonneuse comme levier pour lever, déplacer ou 

casser quoi que ce soit. Il est interdit de brancher sur 

la prise de force de la tronçonneuse des outils ou des 

applications autres que ceux que le constructeur a 

indiqués.

 

ATTENTION - Ne coupez que du bois ou des 

matériaux dérivés du bois. Ne coupez ni métaux, ni 

plastiques, ni pièces de maçonnerie ou tout autre 

matériau qui ne serait pas dérivé du bois.

PRÉCAUTIONS POUR LA ZONE DE TRAVAIL

 - Ne vous approchez pas des fils électriques.

 - Travaillez uniquement lorsque la visibilité et l'éclairage sont 

suffisants.

 - Coupez le moteur avant de poser la tronçonneuse.

 - Soyez particulièrement attentif et vigilant lorsque vous 

portez des casques de protection car de tels équipements 

peuvent limiter la capacité d'entendre les signaux sonores 

d'avertissement (alarmes, signaux d'avertissement, etc.)

 - Soyez particulièrement prudents lorsque vous travaillez sur les 

terrains en pente ou accidentés.

 - Ne coupez pas en dessus dans la hauteur de poitrine, car il est 

toujours plus difficile de contrôler une tronçonneuse placée en 

hauteur en cas de rebond.

 N'utilisez pas la tronçonneuse sur une échelle.

 - Arrêtez la tronçonneuse si la chaîne heurte un corps étranger. 

Inspectez la tronçonneuse et effectuez les réparations si 

nécessaire.

 - Éliminez la poussière et le sable déposés sur la 

tronçonneuse. Même une très faible quantité de crasse 

peut très rapidement émousser une chaîne et augmenter 

le risque de rebond.

 - Veillez à ce que les poignées soient toujours propres et 

sèches.

 - Pendant la coupe d’un tronc ou d’une branche en tension, 

faites attention à ne pas vous faire surprendre par le 

relâchement instantané de la tension du bois.

 - Faites extrêmement attention en coupant les petites 

branches ou les arbustes qui peuvent bloquer la chaîne ou 

être projetés contre vous et vous faire perdre l’équilibre.

Summary of Contents for GS 520





























































Reviews: