INSTRUCTIONS FOR INSTALLATION AND USE
| +358 3 733 1234 | [email protected]
TIPS FOR USING THE XCLIP
Attaching a forearm crutch to the XCLIP
1.
Ensure that the wings on the XCLIP are facing the handle side
of your crutch.
2.
Take hold of the crutch with the XCLIP holder attached in your
right hand, and the other crutch without the holder in your left
hand.
3.
You can hold the crutch by the handle (such as when you are
walking),
OR
hold it from the stem above the handle as shown in the picture.
4.
IMPORTANT:
Ensure the handles are facing straight ahead or
slightly outwards.
5.
Take hold of the right-hand crutch and place the left crutch in
the holder
(at the same position and height as the holder is located on the
other crutch).
6.
After that you can lean the crutches against
a wall, table or chair, or yourself.
NOTE!
A little bit of practice will help you get the most out of
the XCLIP *)
Detaching a crutch from the XCLIP
1.
Press the handles lightly together to release the left crutch from
the holder.
Removing the XCLIP holder from the crutch
2.
Press wing side latches using for example a key or a chisel screwdriver to release latches.
*) To watch the XCLIP installation
videos and get tips on how to use it,
