![background image](http://html1.mh-extra.com/html/oldham/mx-32/mx-32_installation-and-operating-manual_3705471025.webp)
4
– Operating instructions
21
Defining the type of sensor
■
To proceed directly to the next step,
press
(
MENU/ENTER
).
■
Press
(
-
) or
(
+
) to define the type of
sensor connected.
-
BRIDGE
: sensor (Wheatstone bridge
output).
-
EHP
: explosive sensor 4-20 mA.
-
FIRE
: fire detector (ionic, optic, etc.).
-
O2
: oxygen detector 4-20 mA.
-
OTH
: another type of sensor (flame,
etc.).
-
MAN
: see next step.
■
Confirm by pressing
(
MENU/ENTER
).
Defining the calibration mode for the
sensor
■
To proceed directly to the next step,
press
(
MENU/ENTER
).
■
The
MAN
indicator blinks.
■
Press
(
-
) or
(
+
) to define the
operating mode for the yellow sensor LED:
-
MAN
: no visualization (blinking yellow
LED) by the MX 32 controller, of the
sensor being calibrated (sensor
maintenance mode).
-
OTH
: visualization (blinking yellow
LED) on the controller when the sensor
is being calibrated.
■
Confirm by pressing
(
MENU/ENTER
).
Defining the time delay after calibration
mode
(displaying a time)
■
Press
(
-
) or
(
+
) to define the time
delay (in minutes). Confirm the 4 digits by
pressing
(
MENU/ENTER
)
Saving programming
■
Press:
-
(
+
) to select
Yes
. The programming
completed will be used.
-
(
-
) to select
No
. The changes will be
abandoned and the old programming
will be saved.
■
Confirm by pressing
(
MENU/ENTER
).
Summary of Contents for MX 32
