Page | 6
Popcorn Cart Assembly
STEP 1:
Screw one of the
RUBBER FEET (A)
into the bottom of each
SUPPORT LEG
(B)
. Tighten both rubber feet.
STEP 2:
Insert one
WHEEL BOLT (O)
into the bottom holes located on
each side of the
SUPPORT STAND (C)
.
NOTE: Insert bolt from
the inside out.
Secure wheel bolts with one
NUT (Q)
on each
side. Tighten with wrench.
STEP 3:
Hang one
WHEEL
(D)
onto one
WHEEL BOLT (O)
and secure
with one
NYLOC NUT (P)
. Tighten with wrench. Repeat step
for second wheel.
Note: Do not overtighten. Make sure both
wheels spin freely.
STEP 4:
Attach both
HORIZONTAL SUPPORTS - BASE (E)
to the same
SUPPORT STAND (C)
using two
BOLTS (T)
each with one
WASHER (R)
. Tighten with wrench.
STEP 5:
Insert two
BOLTS (U)
, each with one
WASHER (R)
, into each
SUPPORT LEG (B)
. Attach
SUPPORT LEG (B)
to the
SUPPORT
STAND (C)
on the opposite side of the wheels. Tighten with
wrench.