Instructions for Use
03
5.4 Inserting the OkuEl Electrode Into the OkuSpex Frame
To insert the OkuEl electrode into the electrode holder, the OkuEl electrode is pushed from the
face-side of the OkuSpex onto the u-shaped arm of the electrode holder. The electrode side
with the blue seal has to face outward in this case. The electrode must be pushed completely
onto the u-shaped arm, so that it finishes flush with the electrode holder.
In case of the stimulation of only one eye, only one OkuEl electrode and one OkuEl counter
electrode are required. If both eyes are stimulated, two OkuEl electrodes and two OkuEl coun-
ter electrodes are required (see fig.1-2 & 1-3, page 9).
Fig. 5-4: Inserting the OkuEl electrode into the OkuSpex
Rev. 2021-07-01
OkuStim
System
TD60K06 -
15 36
