21 | dac8 Stereo O
wner’s
Manual
| okto research
Status submenu
-
Serial number: shows the serial number that is burned in the OTP (one-time-
programmable) memory
-
FW version: shows the current version of the device firmware
-
Temperature: reading of the temperature on the DAC module
-
Uptime: shows the elapsed time since the unit was powered on
Advanced submenu
-
DPLL BW AES: controls bandwidth of the de-jittering mechanism for AES/EBU inputs.
Increasing the value will allow for operation with more jittery signal sources at a cost
of slightly reduced jitter suppression
-
range: 0 to 15 (default: 8)
-
THD h2: introduces a 2
nd
order nonlinearity to the DAC's transfer curve, potentially
neutralizing second harmonic distortion generated by the DAC chip or subsequent
analog circuitry. This setting is intended for technically proficient users with access to
a high-end audio analyzer.
-
range: -99 to 99 (default: 0)
-
THD h3: same as the previous setting, but for 3
rd
order harmonic distortion
-
range: -99 to 99 (default: 0)
Serial number 123
FW version 1.2
Temperature 35°C
Uptime 1:22:33
DPLL BW AES 8
THD h2 0
THD h3 0