3
3
Safety Notes
In order to achieve maximum performance and to ensure proper operation of your new equipment, please
read carefully the following safety notes and the instructions. If you have any question, please contact Okolab.
−
The equipment must only be used as intended and as described in this Manual.
−
Equipment should be operated only by technically qualified personnel.
−
Do not start up the equipment if some of its parts are damaged.
−
This instrument is not intended for use in locations subject to flammable or explosive gases.
−
Transport the equipment with care.
−
Equipment and its internal parts can be damaged by dropping and by shock.
−
Not following these instructions can result in damage or breakdown of the device and its
accessories.
−
The products labels can be found on the bottom panel of the Main Box.
−
Do not disassemble any part of the system.
−
Do not use a volatile solvent such as paint thinner to clean the instrument, because
deformation or discoloration may occur.
−
Use a soft, dry cloth to remove stains from the instrument.
−
Do not exceed voltage indicated in this manual and on the product label.
−
Avoid excessive induction noise, static electricity and magnetic fields.
−
Do not expose this instrument to rain or moisture.
−
This device is not designed for use for medical applications.
−
Power cord of unit should be unplugged from electrical outlet when left unused for a long
period of time.
−
VENTILATION. Unit should be situated so that its location or position does not interfere
with proper ventilation. Neither the gas mixer nor stream destinations should be in poorly
ventilated areas.
−
Unit should be situated away from heat sources such as open flames, radiators, heat
registers, stoves, or other appliances or processes that produce heat.
−
Do not start up the equipment if the supply cable is damaged.
−
Connect the equipment only to grounded mains power socket.
−
Do not disconnect cables while in operation.
−
Do not open the unit. Do not remove cover or back.
−
Prevent metal fragments or lead wire scraps from falling inside instrument to avoid electric
shock, fire or
malfunction.
−
No user serviceable parts inside.
−
Unit should never be used where it can fall or be pushed into water.
International caution symbol marks this device. It is important to read the “Safety
Notes” before installing, using and
commissioning this device, as the notes contain
important information relating to safety and EMC. Not following these instructions
can result in damage or breakdown of the device and its accessories
We reserve the right to make technical variations.
