17
5.
Se the Setpoint temperature (see paragraph 8.1.1)
6.
Switch the Condensate Drainer on.
Tip
►
Wait until system has reached the steady state before loading your samples.
How to shut down the system
To shut down H201-T-UNIT-BL-CRYO follow the instructions below:
1.
Switch the T-Unit off using the power button on OKO-TOUCH.
2.
Switch the Condensate Drainer off.
3.
Switch the Chiller off and let it cool down or heat up to Room temperature.
4.
Close the valve along the Water Tube. Remove the end of the Water Tube from the connector on the
rear panel of the Chiller. Keep
the Water Tube’s end vertical in order to avoid any water leak
age.
Place the end of the Water Tube in a vessel and let the excess water flow. Open the valve and collect
the remain water. Repeat the operation for both Water Tubes.
5.
Place a vessel under the drain plug placed on the rear panel of the Chiller and open the drain plug to
empty the Chiller.
