DISPOSAL
You must dispose of this appliance and its packaging according to
local laws and regulations.
Because this appliance contains electronic components, the
appliance and its accessories must be disposed of separately from
household waste when the appliance reaches its end of life.
Contact your local authority to learn about disposal and recycling.
The appliance should be taken to your local collection point for
recycling. Some collection points accept appliance free of charge.
We apologise for any inconvenience caused by minor inconsistencies in
these instructions, which may occur as a result of product improvement and
development.
Darty Holdings SAS © 14 route d’Aulnay 93140 Bondy, France 22 / 06 / 2016
As a responsible retailer we care about the environment.
As such we urge you to follow the correct disposal
procedure for the appliance and packaging materials.
This will help conserve natural resources and ensure that
it is recycled in a manner that protects health and the environment.
SPECIFICATIONS
Ratings: 220-240V~ , 50Hz
100W
1. Make sure the cable connector is securely attached to the
pillow connector by pushing both parts together for a tight fit.
2. Make sure that the controller is in the 0 position.
3. Connect the plug into the closest mains socket.
4. Move the heat setting on the controller to the desired heat
level.
5. Always ensure that the heat setting is moved to “0” and
remove the controller from the mains socket when not in use.
• When the heating pillow is in operation, the controller may
slightly warm, therefore, ensure that the controller is not
covered or placed on the heating pillow while the appliance
is switched on.
•
Safety Timer:
The appliance has a built-in timer and will
automatically switch off after 90 minutes.
• To switch back on the appliance, first set the controller to
“0”and wait for about 5 second. Then select the new heat
setting.
Always unplug and remove the controller from the appliance
before cleaning.
The power cable must NEVER come into contact with water.
Clean the heating pillow with a damp cloth. Before using the
heating pillow, make sure it is completely dry.
Take out the heating pillow from the wrap.
Wash the wrap in warm soapy water and rinse it thoroughly.
The wrap may be washed on the WOOL or DELICATES setting of
washing machine at a maximum temperature of 30°C.
Hang the wrap to air dry naturally in a horizontal position until
completely dry.
Do not expose to direct sunlight.
Maintenance
Examine the appliance regularly to check that there are no signs
of wear or damage. If any damage/wear is spotted, do not use
the appliance and seek specialist advice. If the mains lead or
controller is damaged, do not open or attempt to repair them as
they must be serviced by a qualified person.
Storage
When not in use, allow to cool and dry then fold neatly but not
tightly (or roll) in the original packaging without sharp bends in
the heating element.
Store where no other objects will be placed upon it in a cool dry
place.
CLEANING AND MAINTENANCE
OPERATION
Warning: Before each use, check that the heating pillow is not
creased or folded. You must always use the heating pillow with
the wrap.
Downloaded from www.vandenborre.be
