OVERVIEW
Controller
Mains power cable connector
Mains power cable
Heating pillow connector
• Do not use the appliance when it is damp or in moist
environments. It may only be used again once it is completely
dry.
• The controls and leads must not be exposed to any kind of
moisture.
• Do not reach or retrieve the appliance that has fallen into
water. Unplug the appliance immediately.
• During operation, the switch and lead may not be placed on or
under the appliance or covered in any other way whatsoever.
• Do not place any heat sources (e.g. hot water bottles or heating
pads) on the appliance.
• Never carry, pull or turn the appliance using the power cable
and do not clamp the cable.
• Switch off the appliance and remove the plug from the mains
socket when it is not in use.
• In the event of a defect, do not repair the appliance yourself.
Repairs must only be carried out by a qualified personnel.
• Regularly inspect the supply cord, plug, controller and the
heating pillow for any damage. If damage is found, immediately
stop use of the appliance.
• If you experience any pain or discomfort while using the
appliance, stop using it immediately.
Heating pillow
Display to show
the setting 0, 1, 2 or 3
The controller has both numeric
and Braille heat markings.
The settings are:
0 OFF
1 Low heat
2 Medium heat
3 High heat
Downloaded from www.vandenborre.be
