background image

Version 5

May 2021

Contents

Before installation
Usage conditions
Content of packaging
Carrying the main body

After installation
Dimensions
Unit fixing position and plumbing layout
MEMO

1.Installation of Basin Unit
2.Piping
3.Installing the Step
4.Attaching the Seat Part
5.Procedure for swapping the reclining

   pedal from left to right.
6.Attaching the External Covers 

To the installer

• The instructions should be thoroughly read 

  and understood before installation to ensure 

  that YUME-iXi is installed correctly.

• After installation, give these instructions to the customer.

To the customers

• Customers must ask professional to install YUME-iXi.

• Customers must not install YUME-iXi by themselves.

• Customers must store these instructions in 

   a safe place so as not to lose them. 

* The actual shape of YUME-iXi and the images and 

  dimensions listed in these instructions may be modified 

  and are subject to change without notice.

Caution

 The precautions listed here are to ensure that YUME-iXi can be installed safely, and to prevent any danger or risk to the person installing

    YUME-iXi or those around them.All of these precautions are important for safety. Takara Belmont is not responsible for any damage or risk

    to the person installing YUME-iXi or those around them due to accidents if YUME-iXi is installed without adhering to the precautions.

If YUME-iXi is installed after ignoring this symbol,
"there is the risk of light or moderate injury or physical damage". 

Note : Plumbing should be performed by a qualified technician and should meet all national and local plumbing codes and ordinances.
It is the responsibility of purchaser and/or plumber to conform to national and local codes and ordinances.
Takara Belmont does not take any responsibility or liability for plumbing and installation. 

YUME-iXi

 Installation Instruction

1

 

YUME-iXi

Image is of

  

AY-YMIXIHGL*US

              

)

7
8

10
12
13

14

AY-YMIXILGL1US   YUME-iXi 

Ltype

GL1

WHITE

              

 

      

GL2          YUME-iXi 

Ltype

GL2

BLACK

             

        

GL3          YUME-iXi 

Ltype

GL3

DARK BROWN

              

      

 

GL4          YUME-iXi 

Ltype

GL4

MAROON

AY-YMIXIHGL1US

  

YUME-iXi 

Htype

GL1

WHITE

     

  GL2          YUME-iXi 

Htype

GL2

BLACK

                        GL3          YUME-iXi 

Htype

GL3

DARK BROWN

                        GL4          YUME-iXi 

Htype

GL4

MAROON

2
3
4
5

15
16
17
18

Summary of Contents for YUME-iXi





















Reviews: