Software
51
•
Scan dimensions ...
This option is used to enter the correct field dimensions of your measurement. That is very important
to measure distances or positions of potential targets. Check out section 7.4.6 “Setting field
dimensions” on page 54 for additional information!
•
Show map
This function generates a Google Map containing the current measurement. Detailed information
about maps are presented in section 7.4.7 “Showing map files” on page 54.
•
Export as ...
Select this option to export the current measurement into different formats like:
◦
PDF: Generates a PDF document with the current graphical representation and additional scan
information.
◦
PNG: Generates a PNG image of the current graphical representation.
◦
CSV: Generates a CSV file with all measured values along with its GPS data (if available) for
usage in other software products.
◦
DZT: Generates a DZT file that is common for general GPR software products.
Tap on the
button to close the toolbar menu.
7.4.4 Applying filters
After opening a 3D measurement the default filter is applied automatically to improve the visual
representation of your recorded data. For all 2D measurements another filter combination is applied at the
beginning, but you can change both filter configurations manually if necessary.
To apply the filters or change its settings accordingly, you need to open the toolbar menu as described in
section 7.4.3 “Toolbar menu” on page 50. Then you select the option "Filter ...". If you do so, the screen from
figure 7.24 appears.
OKM GmbH
Figure 7.24: Filter dialog
Active filter
Inactive filter
Modify parameter
Factory settings
Cancel
Apply filters
