O
KLAHOMA
S
OUND
C
ORPORATION
6
5) Now apply the left side panel to the semi assembled unit. Be sure to align the cam
bolts to the holes on both the front panel & the shelf.. Be sure that the “BOTTOM” is
securely in groove. Tighten cams. (Diagram C)
6) Screw the Corner braces, on the bottom of lectern, into the “SIDE PANEL” & the
“FRONT PANEL”.
7) Connect the plug coming out of the speakers on the front panel to the plug coming
out of the back of the amp. Fit
the amp between the two sides
and bring the amp up until it
reaches the cleats (wood stub)
then from the bottom of the amp
screw in four screws. (Diagram D)
8) Once again go over all the cams
& check to make sure the lectern
is sturdy.
9) Screw on gooseneck, mic holder
and install microphone for sound
use.
Congratulations! You have success-
fully assembled your lectern, which-
if cared for correctly- should give
you long & satisfactory usage.
Diagram C
Diagram D
AMPLIFIER