Aristocrat Sound Floor Lectern • Model 6010
5
ASSEMBLY OF LECTERN
It is important that the instructions on the assembly are followed carefully
1) The first step of assembly will be to align the holes on the front panel edges with the
three cam bolts on the side panel, tighten cams by turing clockwise until locked.
2) Next will be the Top and Shelf. Make sure the cams on the “TOP” & “SHELF" face the
bottom of the lectern. The two highest bolts align with the two holes on the edge of
the “TOP” (these holes reach until the cams). The two bolts in the center of the right
side panel will align with the two holes on the edge of the shelf. Gently push the
shelves down on to the cam bolts until the shelf is completely on the right side panel.
Tighten.
3) Taking the “BOTTOM” panel, with the casters facing the bottom of the unit insert
panel into the groove, make sure that the panel is all the way in the groove. Screw in
the corner braces to the side and the front panel, there are pre-drilled holes to
guide you. (Diagram B)
Diagram B
FRONT PANEL
TOP
