11
TABLE 3-1:
MAIN MENU
Menu Function Description
SYSTEM INFORMATION
Displays camera basic information (refer to table
3-2)
ADDR SETTING
Used to set the camera address (refer to table
3-3)
MOTION
PTZ setup menu (refer to table 3-4)
PATTERNS
Fancy scan setting (refer to table 3-5)
CAMERA
Lens setting (refer to table 3-6)
CRUISE SETTING
Preset point cruise setting (refer to table 3-7)
IR SETTING
Infrared light setting (refer to table 3-8)
DISPLAY SETUP
Screen display setting (refer to table 3-9)
RESTORE FACTORY
DEFAULT
Restore the factory default setting
REBOOT SYSTEM
System restart; the dome camera to power on
reset
EXIT
Exit the OSD menu setting
<SYSTEM INFORMATION>
TABLE 3-2:
SYSTEM INFORMATION
Menu Function Description
COM: 2400, N, 8, 1
Serial information; display the dome camera
serial baud rate, parity, data bits, stop bits of
information
ADDRESS: 1
Display the current dome camera address code
PROTOCOL PELCO-D
Display the current dome camera communication
protocol
PRESETS: 256
Display the current dome camera preset number
SOFTWARE VERSION: V5.2
Display the current software version
BACK
Return to main menu
EXIT
Exit the menu setting
Note: The system information menu items under this menu cannot be changed.
<ADDR SETTING>
TABLE 3-3:
ADDR SETTING
Menu Function Description
ADDR TYPE: HARD
Divides HARD and SOFT; select the SOF can
directly determine the dome camera address
ADDR SOFT: 1
Within 1~254
ADDR HARD: 1
BACK
Returns to main menu
RESET
Restore to default setting
EXIT
Exit the menu setting
Note: The soft and hard address settings cannot be mixed up. If so, it will cause the
dome camera to be out of control and will require a setting reboot.
