background image

Copyright © 2009. All Rights Reserved. 

http://www.okinausa.com  REV0120809 

 

5.

 

When the camera focus adjustment is complete, use the 
allen wrench to fasten the tamper-resistant housing to the 
base. 

 
 
 
 
 
 
 
 
 

6.

 

When using the side conduit cabling, it is suggested to cover 
the cables using metal conduit (to prevent external damage 
and for waterproof prevention), and wined the waterproof 
adhesive tape (P.T.F.E. Thread Seal Tape) onto the metal 
conduit before installation. 

 
 
 
 
 
 
 
 

7.

 

Connect the video output to the monitor or other video 
device through a 75 Ohms type coaxial cable and the DC 
Jack or AC/DC Terminal to the power source. 

 
 
 
 
 
 
 
 
 
 
 
Once the picture appears on the monitor, open the cover and adjust 
the lens adjustor knobs “NEAR 

←→

  FAR”. Get the view zoom that 

you desire, and then adjust the focus of the lens to obtain the best 
picture. After adjustments, tighten both adjustor knobs. 
 

Vari-Focal Lens Adjustment 

 

 

DIP Switch Setting 

 

Flickerless 
Set switch OFF/F.L. to Flicker to enable Flickerless function. In this 
mode, the switch AES/OFF is auto disabled. 
 

 

AGC 
Adjust the switch to AGC indicates AGC-Hi and OFF indicates 
AGC-Low. AGC-Hi mode: The max. AGC gain is approximately 26dB. 
AGC-Lo mode: The max. AGC gain is approximately 16dB. 

 

Auto Iris 
When using an auto iris lens, the switch AES/OFF should be in the 
OFF position. Adjust VR to the proper level. 
 

 

BLC 
Set switch OFF/BLC to BLC to enable Back Light Compensation 
function. 

 

 

 
 
 
 

*Specifications are subject to change without notice 

 

For any returns, please include all components listed above with original 

packaging in

 Resalable Condition

Absolutely No Returns

 will be 

accepted if any component is missing/damaged. 

 

Model SIR24X-348AIDN-VD SIR24X-342AIDN-VDP
Image Sensor 

1/3” Sony Super HAD CCD 

DSP 

Sony 

Total Pixel 

NTSC: 768(H) x 694(V)

PAL: 500(H) x 562(V) 

NTSC: 510(H) x 492(V)

PAL: 500(H) x 582(V) 

Synchronizing 
System 

Internal 

Resolution 

480 TV Lines 

420 TV Lines 

Minimum 

Illumination 

0.3 Lux @ F2.0 

0 Lux @ IR “on” 

0.2 Lux @ F2.0 

0 Lux @ IR “on” 

S/N Ratio 

More than 48dB 

Flickerless 

NTSC: On / Off, 1/100s switchable 

PAL: On / Off, 1/120s switchable 

Auto Gain Control

High / Low    switchable 

White Balance 

Auto 2500°K~9500°K 

Back Light 
Compensation 

On / Off    switchable 

Gamma 

0.45 

Electronic Shutter

NTSC: 1/60~1/100,000sec switchable 

PAL: 1/50~1/110,000sec switchable 

Video Output 

1Vp-p composite / 75 

 

Lens 

3.3mm~12.0mm Aspherical Auto Iris 

Vari-Focal Lens / F1.6~360     

Made by Daiwon

 

Wide: 83.9°x61.9° / Tele: 23.0°x17.9° (HxV) 

IR LED 

24 IR LED 

IR Wavelength 

850 nm 

IR Distance 

50ft / 15m 

IP Rating 

IP66 

Power Supply 

12V DC + 10% 

Power 
Consumption 

440mA @ IR “on” 

180mA @ IR “off” 

440mA @ IR “on” 

160mA @ IR “off” 

Operating 
Temperature 

14°F ~ 122°F / -10°C ~ +50°C 

Dimension 

5.7”(Ø) x 4.3”(H) 

145mm(Ø) x 108.2mm(H) 

SPECIFICATIONS

 

  To Monitor 

  To DC 12V Power Source 

OPERATION 

Reviews: