DISPLAY SETUP
---------------------------------------
DOME LABEL
OFF
PRESET LABEL
OFF
ZOOM LABEL
OFF
ZONE LABEL
OFF
DIRECTION LABEL
OFF
TEMPERATURE LABEL
OFF
TIME LABEL
OFF
DATE LABEL
OFF
BACK
[DOME LABEL] :
[PRESET LABEL]:
[ZOOM LABEL]:
[ZONE LABEL]:
[DIRECTION LABEL]:
[TEMPERATURE LABEL]:
[TIME LABEL]:
[DATE LABEL]:
show label name
show preset label or scan label
show zoom ratio
show zone Label
show the coordinate position
show the current dome
temperature
show the current time
show the current date
Zone
label
Direction
label
Preset
label
Time
Date
Zoom ratio indicator
Auto flip:
Proportional Pan:
Park time:
Park Action:
Power Up Action:
FAN Enable:
The dome swing the PAN to 180°, when the limit of 90°TILT reach
Inversly controlling
Set the IDLE timer in minutes, and activates the action defined in “PARK ACTION”.
Define the action when “Park time” activate. Selcetable: Preset 1-80, Scan 1-4, Pattern1-4,
Tour 1-4
Start “Park Action” when power up.
Define the temperature limit for the internal cooling fan.
MOTION
--------------------------------
AUTOFLIP
ON
PROPORTION PAN
ON
PARK TIME
005
PARK ACTION
BACK
EXIT
SCAN
POWER UP ACTION
AUTO
FAN ENABLE
040
ADVANCE SETTING ->
→
The “CLEAR” function resets the settings to factory default.
Delete all zones setting
Delete all preset positions
Delete all pattern setting
Delete all tours setting
Delete all privacy masking setting
Reset all setting and return to factory settings
Restart the dome
Note: after using the option “Factory default”, all system setting and stored information such as preset, tour or pattern will be
erased permanently. Please make sure before proceeding.
CLEAR ALL ZONES:
CLEAR ALL PRESET:
CLEAR ALL PATTERNS:
CLEAR ALL TOURS:
CLEAR ALL WINDOWS:
FACTORY DEFAULT:
RESTART:
CLEAR
-------------------------------
CLEAR ALL ZONES
CLEAR ALL PRESET
CLEAR ALL PATTERNS
CLEAR ALL TOURS
CLEAR ALL WINDOWS
FACTORY DEFAULTS
RESTART
BACK
EXIT
The password function can prevent unauthorized access to the OSD and change the setting. It consists a 6 digit number
from 0-9 and can be disable.
Enter the old password
: Enter the new password with 6 digit number
Enter the new passwor again
ENABLE PASSWORD: Activate the login function to the OSD
Default password: 000000
Supervisor password: 892226
OLD PASSWORD:
NEW PASSWORD
CONF PASSWORD:
PASSWORD SETTING
---------------------------------
OLD PASSWORD ******
NEW PASSWORD ******
CONF PASSWORD ******
ENABLE PASSWORD OFF
BACK
EXIT
The system is equipped with a RTC (Real-Time Clock) and can be used to display the date/ time information on the
screen, or schedule enabled operation. In order to use these functions correctly, you need to setup at first.
Change the time setting
Change the date setting
Use [LEFT], [RIGHT] to move the cursor and use [UP], [DOWN] to adjust the value. When finished, press [IRIS OPEN] to
save the setting.
TIME:
DATE:
CLOCK SETTING
--------------------------------
TIME:
HH:MM:SS
DATE:
YY/MM/DD
BACK
EXIT
System Setting
Display Setup
OSD SETUP
English
System Setting
Motion
System Setting
Motion
Advance Setting
ADVANCE SETTING
--------------------------------
EIS ANABLED
N/A
PRESET FREEZE
N/AI
IR HEADLIGHT
MANUAL
HEAD-DOWN
OFF
DEFOGGER
15
WIPER
BACK
EXIT
EIS ANABLED
PRESET FREEZE:
IR HEADLIGHT:
HEAD-DOWN:
DEFOGGER:
WIPER:
: Electronic Image Stablizer. Depends on the camera model, it might not be available.
Freezes the preset image
Performance of the IR-Headlight, selectable with Low, Medium, High or Manual.
When installing the PTZ reversed, turn on this option.
Defogger function in the camera bay.
Starts the Wiper
System Setting
Clear
System Setting
Password Setting
System Setting
Clock Setting
5
