SEIMW36T-V53DN
Manual
HIGH-SPEED PTZ
CAMERA SERIES
OPERATION MANUAL
Ver. 1.0
GERMAN
G50IR-MKII
ENGLISH
INSTALLATION
English
Keep the original box for
possible transport in the future.
Switch 1:
Switch 2:
ID Setup
Digit 1 to 5: Protocol setup
Digit 6,7: Baud-Rate
Digit 8: RS485 Termination(default: off)
For setting details, please refer to
ID & protocol setup
Step 1
Loose the screws (4 pcs)
and open the base-part
Step 2
Take off the base
part for configuration
Step 3
Set the ID, Protocol
Baud-Rate and Termination
For a smooth telemetric operation, it is necessary to set the termination properly.
RS485 Termination
1. Chain Connection
RS 485+
RS 485-
ID:1
Termination
ON
ID:2
Termination
OFF
ID:3
Termination
OFF
ID:4
Termination
OFF
Keyboard
Termination
ON
2. Star-Form Connection
Keyboard
Termination
ON
ID:1
Termination
ON
ID:2
Termination
ON
ID:3
Termination
ON
ID:4
Termination
ON
Use 4 Screws
to fix (not
included)
Wall-Mount Bracket
(optional accessory)
Reverse-Mount
Use 4 Screws to fix
(not included). Change SETTING in OSD
Mounting
Use 4 Screws to fix
(not included)
360°
Pan
180°
Tilt
Surface-Mount
Wall-Mount
Make sure the installation
enviroment provide enough
space for pan and tilt
movement, else it might
damage the mechanic parts.
Sensor
Switch
I/O Interface
Red:AC24V
Black:AC24V
24V AC / 2A
24V
AC
POWER
BNC
VIDEO
RJ-11
RS-485
ALARM
Inner Pin: Video +
Outer Conn.:Video -
Green: RS-485 +
Yellow: RS-485 -
Power
Keyboard
Controller
Monitor
DVR
Connectors
Accessories
Unpacking
Basic Setup
Check-List before installation:
1. Telemetric Protocol setting
2. Dome ID setting
3. Termination setup
3. Necessary Accessories ( e.g Power
supply)
For telemetric control, make sure that:
1. All devices are set with same protocol
and comm setting.
2. All PTZ devices have an unique ID.
3. Control cable (Rs485) are connected
properly.
For controller setup, please refer to the
operation manual
Example:
Protocol: B02
Baud-Rate: 9600
ID:1
ID:2
Telemetric
1
