12
SWING
Function
By using Swing function, you can make camera to move between 2
Preset positions repeatedly. When swing function runs, camera moves
from the preset assigned as the 1
st
point to the preset assigned as the
2
nd
point in CW (Clockwise) direction. Then camera moves from the
preset assigned as the 2
nd
point to the preset assigned as the 1st point
in CCW (Counterclockwise) direction.
In case that the preset assigned as the 1
st
point is same as the preset
assigned as the 2
nd
point, camera turns on its axis by 360° in CW
(Clockwise) direction and then it turns on its axis by 360° in CCW
(Counterclockwise) direction. Speed can be set up from 1° /sec to
180° /sec.
Set Preset
To set Swing, use OSD menu.
<Dome Camera Setup>
<Swing Setup>
Run Swing
E.g.: Run the first swing <Call>[141]<Enter>
E.g.: Run the second swing <Call>[142]<Enter>
Delete Swing
To delete Swing, use OSD menu.
<Dome Camera Setup>
→
<Swing Setup>
→
<Clear Swing>
PATTERN
Function
Pattern Function is that a camera memorizes the path (mostly curve
path) by joystick of controller for assigned time and revives the path
exactly as it memorized. 4 Patterns are available and Maximum 1200
communication commands can be stored in a pattern.
Setup Pattern
<Dome Camera Setup>
→
<Pattern Setup>
→
<Edit Pattern>
Pattern editing screen is displayed as bellow.
EDIT PATTERN1
[NEAR: SAVE / FAR: DELETE]
0 / 0 / X1 / N
