11
STARTING OSD MENU
Function
Using the OSD menu, Preset, Pattern, Swing, Group and Alarm Input
function can be configured for each application.
Enter Menu
Press <Call> + Preset Number [95] + <Enter>
RESERVED PRESET
Description
Some Preset numbers are reserved to special functions.
Function
<Call> [95] <Enter> :
Enters into OSD menu
<Call>[131~134]<Enter> :
Runs Pattern Function 1~4
<Call>[141~148]<Enter> :
Runs Swing Function 1~8
<Call>[151~158]<Enter> :
Runs Group Function 1~8
<Call>[161~162]<Enter> :
Sets Relay Output 1~2 to OFF
<Shot>[161~162] <Enter> : Sets Relay Output 1~2 to ON
<Call>[170]<Enter> :
Sets Camera BLC Mode to OFF
<Call>[171]<Enter> :
Sets Camera BLC Mode to ON
<Call>[174]<Enter> :
Sets Camera Focus Mode to AUTO
<Call>[175]<Enter> :
Sets Camera Focus Mode to Manual
<Call>[176]<Enter> :
Sets Camera Focus Mode to SEMI-AUTO
<Call>[177]<Enter> :
Sets Day&Night Mode to AUTO
<Call>[178]<Enter> :
Sets Day&Night Mode to NIGHT
<Call>[179]<Enter> :
Sets Day&Night Mode to DAY
<Call>[190]<Enter> :
Sets OSD Display Mode to AUTO
(Except Privacy Mask)
<Call>[191]<Enter> :
Sets OSD Display Mode to OFF
(Except Privacy Mask)
<Call>[192]<Enter> :
Sets OSD Display Mode to ON
(Except Privacy Mask)
<Call>[193]<Enter> :
Sets all Privacy Mask Display to OFF
<Call>[194]<Enter> :
Sets all Privacy Mask Display to ON
PRESET
Function
Max 127 positions can be stored as Preset position. The Preset
number can be assigned from 1~128, but 95 is reserved for starting
OSD menu. Camera characteristics (i.e. White Balance, Auto
Exposure) can be set up independently for each preset. Label should
be blank and ”Camera Adjust” should be set to ”GLOBAL” as default.
All characteristics can be set up in OSD menu
Set Preset
<Preset>[1~128 ] <Enter> (Except [95])
Run Preset
<Call>[1~128 ] <Enter> (Except [95]) To delete Preset, use OSD menu.
Delete Preset
<Dome Camera Setup>
→
<Preset Setup>
→
<Ctrl Preset>
