5
PARTS AND FUNCTIONS
RESET button for lens position
•
Optimize AF lens position
•
Reset the correct position of zoom & focus
•
Fixing malfunction of the lens and the focus
error resolved
OSD Menu Open button (Press 3 seconds)
•
Auto, focus & zoom features Stopped
•
Automatically changes to OSD Mode,
OSD Menu will show up
•
Select ‘EXIT’ on OSD Menu, OSD Mode stopped
HARDWARE RS485 WITH PTZ KEYBOARD SETUP
Default protocol is Pelco-D and default baud rate is 9600 for RS485 communication between
camera and PTZ controller.
NOTE: It is highly recommended that you run an additional cable for your RS485
communication from your camera. Some models may have RS485 setting in menu. Please
leave RS485 baud rate setting at 38400.
LENS (AF) Control Mode – Zoom & Focus
Label Name
Function
A/F MENU
Quick Auto Focus Aiming
Button
Zoom-In (Tele)
Zoom-Out (Wide)
Focus-In (Near)
Focus-Out (Far)
Five Direction Key Operations:
OSD Control Mode
Label Name
Function
A/F MENU
ENTER Button
Up
Down
Left
Right
F1 Function Button
•
Locking all control of the camera -
Press 5 seconds
•
Release from locking function -
Press 5 seconds
F2 Function Button
•
Only to the special purpose camera
DOWN
ZOOM_OUT
RESET
OSD
ZOOM_IN
UP
FOCUS_IN
UP
A/F
MENU FOCUS_OUT
UP
F1
F2
Control distance
within 20ft / 6m
