4
CABLE CONNECTION
OSD
NOTE: Camera menu is subject to change without prior notice.
MAIN MENU
Functions can be setup using the “Menu Key Command” from the Visca
protocol.
The menu consists of the “Main Menu” and “Sub Menu”.
The main menu is displayed where 6 camera functions can be selected.
The sub-menu is displayed after selecting a main menu item.
If you want to save the menu, select [SAVE].
If you do not want to save the menu, select [EXIT] then Power off -> on.
If you want to set the menu to default, select [DFLT].
EXPOSURE
MODE: Select LENS type
NORMAL, DEBLUR
BRIGHTNESS: Adjust brightness level
0(dark) ~ 20(bright) steps
SHUT SPEED: Can be set in AUTO or MANUAL
AUTO / x2, x3, x4,
1/30(25),1/60(50),1/120(100),1/240,1/500,1/1000,1/2000,1/4000,1/8000,1/16000,1/30000,1/60000 sec
DSS: Select maximum DSS(Digital Slow Shutter)
OFF / x2, x3, x4
FLICKERLESS: Select Flickerless mode
OFF / ON (remove screen flicker)
AGC: Select Auto Gain Control
OFF / ON
WDR/BLC: Select WDR (Wide Dynamic Range) or BLC (Back Light Compensation)
WDR
↵
LEVEL: Adjust WDR level.
LOW, MID-LOW, MIDDLE, MID-HIGH, HIGH
*WDR doesn’t work in Shutter Manual Mode.
BLC
↵
POSITION: Adjust the window position
SIZE: Adjust the window size
*Can’t use WDR and BLC at the same time.
(When WDR On, BLC is Off. And when BLC is On, WDR is Off)
HD-SDI
12V DC
