DVR
User’s
Manual
42
5.2.2.1
Login / Logout
Login using either <Admin> or <User> account. <Admin> account can modify
configuration without restraint, while <User> account is limited to general
remote access of the unit.
One “Admin” and up to two “Users” can access a DVR at the same time.
Nevertheless, if the “Admin” account is currently accessing the unit’s OSD
setup menu at the DVR site, then the “Admin” account at the remote
monitoring site cannot change the settings at the same time. The Admin
account of the DVR has priority.
The following steps demonstrate procedures to view video from remote unit:
•
Start the remote monitoring software by entering the IP Address of the
DVR in the Address bar of the browser. Alternatively, click on the Favorite
entry for the unit (if the IP address of the unit has been set).
•
Enter the Username and password. The login username and password
can be saved to ease future login. The default usernames and passwords
are listed as below.
Login Type
Default Username
Admin User
Default Password
1234 4321
•
Click <OK> to login to the DVR. The process may take a few seconds.
•
If the connection is made successfully, the main window will display live
video of the attached cameras.
If the IE browser is closed, the remote system is logout and disconnected
from the DVR at the same time.
