DVR User’s Manual
11
3.
General System Setup
Before operating the DVR, some general configuration should be setup first.
The following subsections will introduce function keys on the front panel and
general configuration of the DVR.
The regular displayed OSD information and its displayed positions are shown
as following figure. The channel title will be displayed on the top-left side of
the window, either in full screen mode or in multiple channel mode. The
current operating mode, including Call mode, Dome Control mode, Playback
mode, Freeze mode and Sequence mode, will be displayed on the
bottom-left side of the screen. The date/ time information will be display on
the bottom-right side.
Ch4
►
*1
2008/06/09 PM04:31:22
3.1
Front Panel Introduction
The front panel controls enable users to control the unit and preset the
programmable functions.
3.1.1
LED Definition
The LEDs on the front panel of the DVR are described as follows.
Power LED
The LED lights up when the correct power is connected to the unit.
Alarm LED
The LED lights up when an alarm is triggered.
Network LED
The LED lights up when the DVR is connected to a network and
blinks when the data is being transferred.
REC LED
The LED blinks while the DVR is recording.
