OKIN Refined Electric Technology Co., Ltd
Page 6 of 8
the pairing operating is completed. To test if the pairing successfully, press the Head-up or
Head-down or Foot-up or Foot-down button
,
as so on, related to the actuators , if the click sound
from the relays in the control box can be heard that means it is successful. Otherwise, repeat
the all above steps.
It is strongly recommended that the near control boxes, for example, in a same house, should
be configured differently. Each control box must be paired with the different remote control
where the DIP-Switch position is deferent. Do not pair both control boxes with the same remote
control or the different one but in which the DIP-switch position is same.
4
、
Configuring for synch
Connect the two control boxes with the cable as below, the two control systems can work
synchronously.
It is important that the two control boxes expected to work synchronously must be still
configured differently to pair with the different remote control with different DIP-Switch position.
Do not pair both control boxes with the same remote control or the different one but in which
the DIP-switch position is same.
5
、
Connect to the Control Box