25.
NOTE
: Before reinstalling the plastic cover, you must first
install a new fuse to reset the counter and avoid any error
messages. Use UniNet Reset Fuse #9362.
26. Use a small screwdriver to pry off the toner fill plug.
27. Toner plug lifted.
28. Using a thin needle or small hook tool, pry off the plastic
adhesive tab from the waste hopper openings (two holes)
shown. This is where the waste toner will dump out during
cleaning.
OKIDATA C5100 TONER & DRUM CARTRIDGE REMANUFACTURING INSTRUCTIONS
© 2012 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]
www.
uninet
imaging.com