Oki TF-300P, Field Service Manual, Page: 8 / 137

1-3
ITEM SPECFICATION
(5) Automatic Redial Redial Count
à
selectable by the service parameter (1 to 9)
Redial Interval
à
selectable by the service parameter (1 to 5min)
Redial Condition
à
busy tone detection
(6) Dialling DTMF(Pulse Optional)
(7) PABX-> PSTN Access YES (Digit / Flash) (Earth optional)
5. Telephone Features
(1) Built-in Handset Yes
(2) Monitor Speaker Yes
(3) Handsfree Talking No
(4) On-Hook Dialling Yes
(5) Volume Control On-line adjustment (4 levels), automatically fallback to default
value when the call is finished. (Speaker and internal ring signal)
(6) Tel/Fax Switch Yes
(7) Power Off Dial Ten key dial (Option)
(8) Recall Function YES (long or short Flash = fixed by FW) (Earth Option)
(9) Ringer Volume Control YES (ON/OFF only)
(10) Confidence Tone Option
6. Communication
(1) Transmit Level 0dBm to –15dBm
(2) Reception Levels
T.30 Reception
Other Signal
0 dBm to –43 dBm
-5 dBm to –43 dBm
(3) Mo dem Recommendation V29, V27ter, V21 for R96DFXL (Basic)
V29, V27ter, V21, V17 for R144EFXL (option)
7. Report/Lists
(1) Activity Report 40 Transactions (On/Off)
(2) Tx/Rx Confirmation Report Yes (On/Off/Error)
(3) Phone Book Alpha dial and One Touch dial printed on different pages.
(4) User Options / Setup Yes
(5) Callback Message No
(6) Service Options / Setup Yes
(7) Power Failure Report When power-failure happens during the following conditions,
“Power Failure Report” will be printed after power-on.
a) XMTing (ADF or Memory)
b) Redial Waiting
c) Delay XMT pending
d) RCVing
e) Memory Reception file pending