OKI Data Infotech Corporation CONFIDENTIAL
Chapter 3 Receive the shipment and set up the Printer in the final position
3-11
3.4.2
Adjusting leveling feet
Adjust the height of the four leveling feet with the procedure below.
1
Turn the nuts to lower the four adjustable
leveling feet until the four casters are about 1
mm off the floor.
If the floor is carpeted, adjust to a height so
the casters can just barely be turned by hand.
Caution
Do not lift the printer unless absolutely necessary.
2
After adjusting all four positions, tighten each
nut to secure the adjustable leveling feet.