– 44 –
8-2-2. Slip paper
Press the RELEASE button on the control panel in order to auto-release the paper.
If the paper cannot be removed by performing an auto-release, open the front cover, push the
point A or B on the platen, and remove the paper.
Caution Symbol
This symbol is placed near the slip print head to indicate that it may be hot.
Never touch the slip print head immediately after the printer has been used. Let the
print head cool for a few minutes before touching it.
This symbol is placed near the thermal print head to indicate that it may be hot.
Never touch the thermal print head immediately after the printer has been used. Let
the print head cool for a few minutes before touching it. Observe the precautions
for handling electrostatic sensitive devices.
This symbol is placed near the cutter.
Never touch the cutter blade, as you could injure your fingers.
This symbol is placed near the peripheral drive connector.
Do not connect this to a telephone.
B
A
Thermal head
POWER
ERROR
PAPER
OUT
SLIP
FEED
RELEASE