– 18 –
(1)
Push the cover open lever, and open the printer
cover.
(2) W
ith the leading edge of the roll coming up from the bottom
as illustrated below
,
put
the paper roll into the
printer
, and
pull
the leading edge of the paper
straight
toward you.
CAUTION
Do not pull out the end of the paper diagonally,
as it will cause the paper to become jammed or
skewed.
(3) Push down both sides of the printer cover to
close
it
.
Note:
Make sure that the printer cover is securely
closed.
(4) If the printer cover is closed after turning on the
power, the cutter operates automatically and the
front end of the paper is cut.
4-2. Loading the Paper Roll
4-2-1. Using 79.5 mm Width Paper Roll
Be sure to use roll paper that matches the printer’s specification.
See Sections 5 and
10 for more information.
When using a paper roll 57.5 mm wid
e
, install the paper guide as described on the
on the
following page.
Cover open lever
Paper roll
ERRO
R PAPER
OUT
SLIP
FEED
RELEASE
ERROR
PAPER
OUT
SLIP
FEED
RELEASE
ERROR
PAPER OUT
SLIP
FEED
RELEASE
POW
ER
ERROR
PAPER
OUT
SLIP
FEED
RELEAS
E