Oki Pacemark PM4410, Software Manual, Page: 80 / 118

3.5.2 Entering the Barcode Font
Enter barcode fonts in the following format.
Enter “z”, which is the final character of the barcode font, at the end of the code.
e.g., For CODE39
Data to enter: apABCDE67890z
a p ABCDE6780 z
• Parameter for barcode end
Enter “z”.
• Barcode data
Enter actual barcode data.
• Parameter to set height
Specify within range of “o” to “v”.
• Parameter to set mode
Specify within range of “a” to “i”.
For details of each parameter, refer to “Barcode Font Parameter List” on the next page.
80