Oki Pacemark PM4410 Software Manual Download Page 73

Page: 73 / 118

3.3 Device Fonts

This driver is equipped with a variety of device fonts that can be used in Line mode.

As these fonts were designed specifically to match the characteristics of the printer, they offer clearer printing

than TrueType fonts.

Important: Select the proper height when using device fonts.

For two-color printing, refer to “3.6 Selecting the Print Color” for setup.

The supported device fonts are shown below.

Fonts

Width

(pixels)

Height

(pixels)

Columns at

72 mm (576 dots)

Meaning

Printer 17 cpi

Thermal printer

fonts

Printer 8.5 cpi

Printer 17 cpi Tall

Printer 8.5 cpi Tall

Printer 16 cpi

Printer 8 cpi

Printer 16 cpi Tall

Printer 8 cpi Tall

Printer 14 cpi

Printer 7 cpi

Printer 14 cpi Tall

Printer 7 cpi Tall

Printer 17 cpi (RED)

Printer 8.5 cpi (RED)

Printer 17 cpi Tall (RED)

Printer 8.5 cpi Tall (RED)

Printer 16 cpi (RED)

Printer 8 cpi (RED)

Printer 16 cpi Tall (RED)

Printer 8 cpi Tall (RED)

Printer 14 cpi (RED)

Printer 7 cpi (RED)

Printer 14 cpi Tall (RED)

Printer 7 cpi Tall (RED)

Summary of Contents for Pacemark PM4410























































































































Search results

Summary of Contents for Pacemark PM4410

Reviews:

Oki Pacemark PM4410, Software Manual, Page: 73 / 118

Search results

Summary of Contents for Pacemark PM4410

Reviews: