Oki OL1200, Service Manual, Page: 86 / 272

Page: 54
Service Guide OL1200
Chapter 3 Parts Replacement
3.3.19 Drum motor
(1) Turn the AC power switch off. Unplug the AC power cord from the outlet.
(2) Remove the main chassis unit (see 3.3.17).
(3)
Remove the registration roller Assy (see 3.3.18 (1) to (3)).
(4) Remove fuser Assy.
(5) Release the latch of fuser pressure roller release lever 1 and pull out it toward the right. (At this time,
idle gear H (2) is also removed.)
(6) Remove spring 3 and then remove pressure release lever 4. Be careful, do not lose or damage
spring.
(7) Remove EP lock spring 5 and then remove ED lock lever 6.
(8) Release two latches and remove motor Assy 7.
(9) Remove two screws 8 and then remove drum motor 9 and heat sink.
(10) Remove two screws 10 and then remove registration motor A.