Oki OL1200, Service Manual, Page: 164 / 272

YES END.
Go to on the next flow.
From on the preceding flow .
Yes Is the transfer roller rotating smoothly?
No Is there any defective gear of the transfer roller?
Yes Replace the defective gear.
No Replace the transfer roller.
Yes Is the fuser unit installed properly?
No Install the fuser unit properly.
Yes Is the image drum cartridge set properly?
No Set the image drum cartridge properly.
Yes Does the paper sensor lever operate smoothly?
No Replace the paper sensor lever.
Yes Clean the paper sensor on the Power/sensor board.
(See Fig. 2-3 Sensor Layout Diagram.)
Is the printer recovered?
No Replace the Power/sensor board.
YES END.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)