Oki OKIPAGE 24DX, Service Manual

Page: 158 / 424

(9) Duplex adjust
The function which performs a correction in Y direction towards the sheet supplied from the tray in double-sided
l
printing.
(10) Select paper source command parameter (Second tray)
The function which sets the parameter selecting the second tray by paper source command (ESC & N # H) on
l
PCL. (11) Select paper source command parameter (Third tray)
The function which sets the parameter selecting the third tray by paper source command (ESC & N # H) on
l
PCL.
(11) Select paper source command parameter (Third tray)
The function which sets the parameter selecting the third tray by paper source command (ESC & l # H) on PCL.
l
(12) Select paper source command parameter (Front tray)
The function which sets the parameter selecting the front tray by paper source command (ESC & N # H) on
l
PCL.
(13) Page placement
The function which aligns a printing image to the right.
l
(14) SETTING
This function is used to adjust to improve print quality.
l
-2 } Rough/thick paper, Low temperature/humidity and/or blotchy faded print appeared.
-1 } Rough/thick paper, Low temperature/humidity and/or blotchy faded print appeared.
0 } Normal media/environmental conditions.
+1 } Rough papers, high temperature/humidity and/or snowy print of high density pattern.
+2 } Rough papers, high temperature/humidity and/or snowy print of high density pattern.
(15) Cleaning cycle
Set the page interval to perform Cleaning Sequence.
l
When stains build up especially in using rough papers. Change the cleaning cycle. The shorter the cycle is set, the
less the stains become.
Normal : Each 20th page (default)
Middle : Each 10th page
High : Each 3rd page
User maintenance mode menu system