Oki OKIPAGE 24DX, Service Manual

Page: 133 / 424

Page: 58
Service Guide OKIPAGE 24DX/24DXn
Chapter 3 Parts Replacement
3.3.28 Lever-Paper end & Lever-Paper near end
(1) Turn the AC power switch off. Unplug the AC power cord from the outlet.
(2) Remove the frame main [See 3.3.12(7)]
(3) Remove screw (1) and then remove the PLATE-Base
(2)
.
(4) Remove two Spacer-Cord (KGPS-5RF (3) and then remove FILM-Insulation
(4)
.
(5) Remove four screws (5) and then remove the FRAME ASS-Hopping
(6)
.
(6) Remove the GEAR-Z58
(9)
and GEAR-Z42
(8)
. (At this time, the ADF Bearing
(10)
can also be detached
simultaneously.)
(7) Remove the GEAR-Z38
(14)
, ADF Bearing
(15)
, ROLLER-Guide
(16)
and SHAFT Hopping
(17)
and Bracket-Sub
roller
(28)
. (At this time, the Lock Pin
(18)
can also be detached simultaneously.)
(8) Remove two screws (7) and then remove the SPRING-Release
(11)
and then remove the LEVER-Sub roller
(12)
and PLATE-Hopping
(13)
.
(9) Remove the GEAR-Planet(Z28)
(19)
, Plate-Planet
(20)
, BRACKET-Spring (Sub)
(21)
and SPRING-Sub ROLLER
(22)
.
(10) Press the clamp part of Lever-Paper end
(23)
and Lever-Paper near end
(24)
. Remove the Lever-Paper end
(23)
and Lever-Paper near end
(24)
by pushing it upward from the FRAME Hopping
(28)
.
(11) Remove the Connection Cord-Wire
(25)
and TR-23-11-14 R CORE
(26)
together.
(12) Remove two Photo Sensor
(27)
.