manualshive.com logo in svg

Oki OKIFAX 5400, Handbook

Share
Download
Oki OKIFAX 5400 Handbook Download Page 155

Overview

|

Handbook

155

User Function Settings

02 MCF(MULTI-LOC.)

This function automatically prints a Message
Confirmation Report after each multiple-location
transmission. The report provides information about the
transmission. Refer to the “Reports, Message
Confirmation Report” section of this handbook.

Available settings are ON (default) and OFF.

03 ERR REPORT (MCF)

This function automatically prints a Message
Confirmation Report every time an error occurs during a
transmission or polling transmission operation. The report
provides information about the transmission. Refer to the
“Reports, Message Confirmation Report” section of this
handbook.

Available settings are ON (default) and OFF.

User function settings allow you to customize the general
operation of your fax machine. Refer to the following User
Function Settings List to determine which settings you may
need to change, then refer to the “Changing Your User
Function Settings” part of this section to make the change.

User Function Settings List

01 MCF(SINGLE-LOC.)

This function automatically prints a Message
Confirmation Report after each single-location
transmission or polling transmission. The report provides
information about the transmission. Refer to the “Reports,
Message Confirmation Report” section of this handbook.

Available settings are ON and OFF (default).

Summary of Contents for OKIFAX 5400

























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands